Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

Vacuum accessories
http://www-.luthiersforum.com/forum/viewtopic.php?f=10101&t=46675		 Page 1 of 1
Author:  dofthesea [ Mon Nov 16, 2015 7:58 pm ]
Post subject:  Vacuum accessories
Where might everyone acquire vacuum gasket material? And what size is typically used for misc jigs? Thanks
Author:  Pmaj7 [ Mon Nov 16, 2015 8:39 pm ]
Post subject:  Re: Vacuum accessories
I got some of the D shaped material from lmi which worked great. I've also used regular rectangle cross section closed cell window gasket stuff. Works great too. Basically any closed-cell material will work.
Author:  dofthesea [ Mon Nov 16, 2015 8:47 pm ]
Post subject:  Re: Vacuum accessories
Thanks Pat, I was looking to buy in bulk. LMI's price of $4 per ft would get expensive as I'll be building quite a few jigs.
Author:  Pmaj7 [ Mon Nov 16, 2015 9:07 pm ]
Post subject:  Re: Vacuum accessories
Yea, definitely just buy regular closed cell weather strip. I have been wanting to try some from Joe Woodworker veneering supply. It looks denser and more low profile. Maybe tougher.
Author:  david farmer [ Mon Nov 16, 2015 10:33 pm ]
Post subject:  Re: Vacuum accessories
I have used these guys. http://allstaradhesives.com/cnc/howitworks/faqs
They even sent me sampler box to figure out what I wanted.
Author:  Pmaj7 [ Tue Nov 17, 2015 12:15 pm ]
Post subject:  Re: Vacuum accessories
I am def getting this next time. Looks like good stuff and inexpensive.
http://www.veneersupplies.com/search.ph ... &x=48&y=16
Author:  SteveSmith [ Tue Nov 17, 2015 12:19 pm ]
Post subject:  Re: Vacuum accessories
pat macaluso wrote:
I am def getting this next time. Looks like good stuff and inexpensive.
http://www.veneersupplies.com/search.ph ... &x=48&y=16


I've got some and it does work well.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/